MIL-STD-704 Aircraft Electrical Power Specifications Standard, prepared by the United States (US) Department of Defense, is a military standard that covers issues such as voltage, frequency, phase, fluctuation and maximum current in a military aircraft and its equipment. The most current version of the standard is MIL-STD-704F_CHG-1, published in 2016. However, this standard is not a standard that only covers the US military and its subcontractors, but is a globally accepted standard for evaluating the suitability of military aircraft and systems. It is converted to the voltage levels required for the operation of the equipment used in the aircraft power system, which comes with a power source that complies with the MIL-STD-704 standard. In order for a piece of equipment to operate in accordance with the MIL-STD-704 standard, it must pass MIL-STD-704 tests to see its effects under difficult conditions and to verify its conformity.

The LDC102 Voltage Steady State Limits Test is performed to verify that 28V DC power handling equipment operates and maintains specified performance when powered within the Normal Low Steady State (NLSS) limits and Normal High Steady State (NHSS) limits. LDC102 Voltage Steady State Limits Test takes a minimum of 30 minutes.

The verification criterion in the LDC102 Voltage Steady State Limits Test is that the usage equipment has passed if it operates and maintains performance as specified in the usage equipment performance specification document for normal aircraft electrical conditions when supplied with voltage input power at the specified normal steady state limits of the applicable version(s). acceptable.

LDC102 Voltage Steady State Limits Test As specified in MIL-STD-704 and the table, use equipment must maintain specified performance for a period of time that verifies that the use equipment can operate continuously at steady state voltage and frequency limits, and shall maintain specified performance for each of the thirty (30) LDC102 Voltage Steady State Limits Test conditions. ) should not be less than minutes. In the LDC102 Voltage Steady State Limits Test, equipment for use must demonstrate restarting at steady state voltage limits.
The equipment used in the LDC102 Voltage Steady State Limits Test must not be damaged or cause an unsafe condition.