STEST

RE102 TEST

Standard Control and Testing Services
STEST has been accredited by TURKAK within this scope since 2021.
TURKAK Accreditation Certificate

TURKAK Accredited Testing and Verification

STEST is accredited by the Turkish Accreditation Institution (TURKAK) and carries out its testing and verification activities in an independent, competent, and impartial manner in compliance with national and international standards.

TURKAK Accredited Competent Laboratory International Recognition
High-Frequency Electromagnetic Emissions Control in Accordance with MIL-STD-461

RE102 Test (Radiated Emissions, Electric Field, 10kHz–40GHz)

The RE102 test, performed within the scope of MIL-STD-461, is intended to evaluate high-frequency electromagnetic emissions of electrical and electronic equipment (primarily in terms of the radiated electric field). The test helps ensure that equipment does not interfere with other onboard systems and meets electromagnetic compatibility (EMC) requirements, supporting the reliable operation of communication and sensing systems.

Purpose of the RE102 Test Objective

  • Measure and evaluate high-frequency electromagnetic emissions.
  • Confirm that onboard systems are not adversely affected by radiated emissions.
  • Support the reliable operation of communication and sensing systems.

Scope of the RE102 Test Scope

  • Applicable to equipment used on military platforms.
  • Tests are performed under normal operating conditions of the equipment.
  • Frequency ranges and limits defined in MIL-STD-461 revisions E, F, and G are applied.

RE102 Test Method Process

  • Electric field measurements are taken using log-periodic or horn antennas.
  • Normal operating functions of the equipment are monitored throughout the test.
  • Measured values are compared against the applicable standard limits.

Our RE102 Testing Services and Infrastructure STEST

  • We perform RE102 tests in accordance with MIL-STD-461 revisions E, F, and G.
  • Testing is carried out in our TÜRKAK-accredited laboratory, compliant with TS EN ISO/IEC 17025.
  • RE102 testing is performed in our semi-anechoic test room under the measurement conditions required by military standards.

At STEST, we perform RE102 high-frequency radiated emissions tests under the scope of MIL-STD-461 in full compliance with military standards, using our accredited infrastructure and semi-anechoic test room.

REQUEST A TEST APPOINTMENT
RE102 Testi

EMI/EMC Test Chamber Features

Technical Specification
Test Chamber 1
Test Chamber 2
Unit
Width
6850
13000
mm
Depth
5900
10000
mm
Height
3800
9000
mm
Door Dimensions
1000×2000
4200×4750
mm
Rotary Table Diameter
-
6
m
Rotary Table Load Capacity
-
70
ton
Reflectivity
Semi-anechoic
Semi-anechoic
-
MIL-STD-461E Standard
Legacy electromagnetic compatibility (EMC) requirements used for older military systems and comparative evaluations.
Download PDF
MIL-STD-461F Standard
Defines EMC test methods and requirements for military and aerospace electronic systems.
Download PDF
MIL-STD-461G Standard
The latest military standard specifying updated electromagnetic compatibility (EMC) test requirements and limit values.
Download PDF